OBD-II Generic Error Code P2114: How to Fix It

Medium 30-60 minutes Medium Severity Verified June 2026
Summarize with ChatGPTSummarize with ClaudeSummarize with Perplexity Add as Preferred Source on Google
Error Code
P2114
Brand
OBD-II Generic
Product Type
automotive
Severity
Medium
DIY Difficulty
Medium
Estimated Fix Time
30-60 minutes
Error code P2114 indicates that the throttle position sensor (TPS) C is not performing as expected at its minimum stop position. This often means the sensor is stuck, misadjusted, or failed, potentially causing poor acceleration, rough idle, or reduced power. Follow this guide to diagnose and fix the issue.
Ad

Tools You'll Need

How to Fix Error Code P2114

  1. Check for Safety and Prepare

    Always disconnect the battery before working on throttle components to avoid electrical shock or damage.

  2. Locate the Throttle Position Sensor

  3. Inspect Wiring and Connector

    Do not force the connector; use a flathead screwdriver to gently release the locking tab.

  4. Test the Throttle Position Sensor

    Be careful around moving parts; do not operate the throttle with your hands near the intake.

  5. Check Throttle Body for Carbon Buildup

    Do not spray cleaner into the throttle body with the engine running. Use only approved throttle body cleaner.

  6. Replace the Throttle Position Sensor

    Ensure the new sensor is compatible with your vehicle make and model. Some sensors require adjustment after installation.

  7. Perform Idle Relearn Procedure

    If the engine runs rough or RPMs are erratic during relearn, turn off the engine and check for vacuum leaks.

Parts You May Need

Throttle position sensor
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
OBD2 scanner
Check Price on Amazon
Throttle position sensor
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
OBD2 scanner
Check Price on Amazon
Throttle position sensor
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
OBD2 scanner
Check Price on Amazon
Throttle position sensor
Check Price on Amazon
Throttle body gasket
Check Price on Amazon
OBD2 scanner
Check Price on Amazon
Ad

When to Call a Professional

If after replacing the TPS and cleaning the throttle body the code returns, or if you are uncomfortable testing electrical components, consult a professional mechanic. A mobile mechanic or dealership can perform advanced diagnostics, such as checking the ECU wiring or throttle actuator.

Frequently Asked Questions

Can I drive with error code P2114?
It is not recommended. The vehicle may enter limp mode, reducing power and acceleration. Driving with a faulty TPS can also cause poor fuel economy or stalling. Fix it as soon as possible.
What causes P2114?
Common causes include a faulty throttle position sensor, dirty throttle body, damaged wiring or connector, or ECU calibration issues.
How do I clear the P2114 code?
Use an OBD2 scanner to clear the code after repairs. If the issue is fixed, the code should not return. Disconnecting the battery for 15 minutes may also clear it, but the check engine light may come back if the problem persists.
Is throttle position sensor replacement expensive?
The sensor itself costs $20–$100, depending on the vehicle. Labor at a shop may add $80–$150. DIY replacement saves the labor cost.
Can a bad TPS cause transmission problems?
Yes, since the ECU uses throttle position to determine shift points, a faulty TPS can cause erratic shifting, delayed shifts, or harsh engagement.

Related Error Codes