OBD-II Generic Error Code P2761: How to Fix It

Q: What does error code P2761 mean?

P2761 means the PCM has detected an electrical fault in the control circuit of the torque converter clutch (TCC) pressure control solenoid A. This solenoid regulates hydraulic pressure to lock the torque converter, improving fuel economy.

Q: Can I drive with a P2761 code?

It is not recommended. Driving with this code can cause transmission slip, overheating, and possible damage. You may experience poor fuel economy or erratic shifting. Have it inspected as soon as possible.

Q: What causes a P2761 code?

Common causes include low or dirty transmission fluid, a faulty TCC solenoid, damaged wiring/connectors, or a defective PCM. Internal transmission issues are less common but possible.

Q: How much does it cost to fix P2761?

If it's just a wiring repair, it may cost $100-$200. Solenoid replacement typically ranges from $200 to $600, including parts and labor. PCM replacement can exceed $1,000.

Q: Will clearing the code fix P2761?

Clearing the code may temporarily turn off the check engine light, but the problem will likely return unless the underlying electrical or solenoid issue is addressed.

Abstract

Error code P2761 indicates a problem with the torque converter clutch (TCC) pressure control solenoid A control circuit in your vehicle's automatic transmission. This code is triggered when the powertrain control module (PCM) detects a fault in the electrical circuit to the solenoid, which can cause transmission shifting issues and reduced fuel economy.