OBD-II Generic Error Code P2007: How to Fix It

Q: Can I drive with code P2007?

Short drives are possible, but extended driving may cause reduced performance, poor fuel economy, and potential damage to other components. It's best to address the issue promptly.

Q: What does 'bank 2' mean?

Bank 2 refers to the side of the engine that does not contain cylinder #1. For V6/V8 engines, it's typically the passenger side on front-wheel-drive vehicles and the driver's side on rear-wheel-drive vehicles.

Q: How much does it cost to fix P2007?

If it's a vacuum leak or electrical issue, repair might be under $100. Replacing an intake manifold can cost $300-$800 including labor.

Q: Can I clean the IMRC flaps without removing the manifold?

Some vehicles allow access through the throttle body. Use intake spray cleaner while the engine is running (careful!). Full cleaning often requires manifold removal.

Q: Will a bad IMRC cause a check engine light?

Yes, P2007 is a generic OBD2 code that will turn on the check engine light. It may also trigger other codes like P2006 for bank 1.

Abstract

Error code P2007 indicates that the intake manifold runner control (IMRC) for bank 2 is stuck in the closed position. This reduces airflow into the engine, causing poor performance, rough idle, and reduced fuel economy. The IMRC system uses flaps inside the intake manifold that open and close to optimize airflow at different RPM ranges.