OBD-II Generic Error Code P0375: How to Fix It

Q: Can I drive with error code P0375?

It is not recommended to drive long distances with P0375. The engine may run poorly, stall, or fail to start, leading to unsafe driving conditions. Get the issue diagnosed and fixed promptly.

Q: Will replacing the crankshaft position sensor fix P0375?

Often, yes. A faulty CKP sensor is a common cause. However, the camshaft sensor, wiring, or reluctor ring could also be the culprit. Always test before replacing parts.

Q: What does 'high resolution signal B' mean?

High resolution signals come from the crankshaft or camshaft position sensors to provide precise timing data to the ECU. 'Signal B' typically refers to the camshaft position sensor. A problem with this signal can disrupt fuel injection and ignition timing.

Q: How much does it cost to fix P0375?

If it's a sensor replacement, parts cost $20-$100 and labor $50-$150 if done by a shop. DIY is cheaper. If the reluctor ring or timing components need repair, costs can exceed $500.

Q: Can a bad battery cause P0375?

While unlikely, a weak battery or poor ground can cause erratic sensor readings. Check battery voltage and grounds as part of your diagnosis.

Abstract

Error code P0375 indicates a problem with the timing reference high resolution signal B in your vehicle's engine management system. This signal is critical for precise ignition timing and fuel injection. When this code appears, the engine may run rough, lose power, or stall. Most often, this is caused by a faulty crankshaft or camshaft position sensor, wiring issues, or a damaged reluctor ring.