OBD-II Error Code P0808: How to Fix It

Q: Can I drive with error code P0808?

It's not recommended. The clutch position sensor tells the ECM when the clutch is engaged or disengaged. A faulty signal can cause harsh shifting, reduced performance, or transmission damage. Drive only to a mechanic if necessary.

Q: What causes a high input on the clutch position sensor?

Common causes include a short to voltage (e.g., 5V or 12V reference), a faulty sensor, damaged connector or wiring, or a problem with the ECM itself.

Q: Where is the clutch position sensor located?

Typically on the clutch pedal assembly inside the cabin, or on the transmission housing near the clutch fork. Consult your vehicle's repair manual for exact location.

Q: How much does it cost to fix error code P0808?

DIY cost is around $20-60 for a replacement sensor plus any wiring repairs. Professional repair can range from $100 to $300 including labor and diagnosis.

Q: Will clearing the code fix P0808?

No. Clearing the code may temporarily turn off the check engine light, but if the underlying fault is not repaired, the code will return.

Abstract

Error code P0808 indicates the engine control module (ECM) has detected a high voltage signal from the clutch position sensor. This usually means the sensor or its circuit has an issue, such as a short to power or a faulty sensor. Driving with this code can affect clutch engagement and transmission shifting.