Windows Update Error Code 80070103: Resolve This Error With Brilliant Hacks
To avoid any future error or threats to your system, it is always good to keep the system up-to-date. Installing the Windows Update regularly helps to keep your system error-free. But many a time, you can end up with some error code. The most common error code is the Windows update error code 80070103.
We understand that this issue is quite frustrating as you don’t know how to resolve it. Also, if this issue occurs, all the Windows update stops to work on your system. Hence, in order to learn the methods, you can take the help of this guide here.
In this article, you will get to know the troubleshooting methods to resolve this Windows error code. Moreover, we are also going to learn the causes that lead to this issue. Therefore, you can now proceed to the next section of the article.
Popular Causes of the Windows Update Error Code 80070103:
Now, we will try to discuss some of the causes that are popular in leading to this issue. Hence, you can straight away follow the points that we have listed below:
- When Windows tries to install a driver which is already there, then this issue can occur.
- In another case, if you are using a proxy server to download Windows Update, then also the issue persists.
- A problematic device driver can also lead to this issue.
- Outdated or corrupted device drivers are also a source of the issue.
- If there is a compatibility issue, then also the issue can persist.
Hence, these are all the causes that can be held responsible for the error code to occur. Therefore, now its time to learn the methods to fix the issue on your own. So, you can proceed to the next part of the article.
Top-notch Methods to Try in order to Fix the Windows Error Code 80070103:
After gaining some knowledge about the cause of the Windows issue, you can continue following the section here. For availing the best resolution, you have to carry out all the given steps in the methods. So, now we would like you to follow the methods that we are going to discuss in the following part:
Method 1: Hide the Windows Update
Microsoft allows its users to hide Windows Update in order to fix certain errors. Hence, follow the steps below in order to perform the process:
- Initially, click on the Start menu and then from there, search for the Windows Update.
- As the Windows Update window appears, click on the Check for Updates.
- After that, you have to click on the Optional Updates are available option.
- Now, right-click on the update that you need to hide it. Next, click on the Hide Update option or Don’t show this update again option.
- Now, complete the process by clicking on the Install remaining updates option.
- After that, restart your system and then check whether the issue still persists.
Now, we expect that you will be able to fix the Windows error code on your own. However, in case the issue still occurs, proceed to the next method.
Method 2: Identify and Update the Faulty Device Driver
At first, you have to identify the driver and then to resolve the issue, you have to update it. Therefore, the steps that will help you to perform the method are provided in the below section:
- In the first step, open the Run box with the combination of the Windows logo key and the R key at the same time.
- As the Run box opens, type Windows Update and then press the Enter key. This action opens up the Windows Update window with multiple apps.
- After that, proceed to the Application section.
- Now, click on the View installed update history option and here you can view all the successful and failed apps and drivers.
- Once you identify the faulty driver, again you have to open the Run box.
- Now, enter devmgmt.msc and then click on the OK button in order to continue.
- As the Device Manager window opens, search for that same faulty driver.
- Now, right-click on it and then click on the Update driver option from the list.
- Once the driver updates successfully, you can restart the system.
- As the system reboots, you can check if you still get to see the issue or not.
After performing this method, you will now be able to fix the issue on your own. Even if this method fails to provide any solution, then follow the next method.
Method 3: Run the Windows Update Troubleshooter
The inbuilt Windows Update Troubleshooter helps to detect the errors that occur on your system. Moreover, the Troubleshooter also fixes any errors that you get in your Windows system. Hence, the process to run the Troubleshooter are given below:
- Open the Settings app from the Start menu. When the Settings window opens, proceed to the Control Panel section.
- Now, in the search bar of the Control Panel, enter Troubleshoot. Here, click on the Troubleshoot option that will lead to the Windows Update section.
- Now, click on the Run the Troubleshooter button. If prompted, you can enter your account credentials to log in as Administrator.
- After that, follow all the on-screen prompts in order to complete the Windows Update troubleshooting process.
- Finally, restart your system and then check if you are still struggling with the same Windows problem or not.
Therefore, this is how you can fix the issue by running the Windows Update Troubleshooter tool. In case, for more fixing methods, you can proceed to the following section.
Method 4: Configure the Proxy Server Settings
Most of the users have stated that fixing the Proxy server settings have helped them to resolve the issue. Therefore, it is advisable to try out this method now. Hence, we have discussed some of the steps in the following section below:
- At first, open the Run box from your system’s keyboard.
- As the Run box opens, type cmd and then click on the OK button. This will invoke the Command Prompt window to open on your screen.
- Now, inside the Command Prompt window, enter the netsh winhttp show proxy command.
- After that, press the Enter key and allow the command to execute.
- If you get a message saying Direct Access (no Proxy server), then proceed with the next step.
- In the next step, type sfc /scannow command then again hit the Enter key.
- Now be patient till the scanning process finishes, and then restart your system.
- As the system restarts, you have to check if the Windows error code still pops up or not.
Now in case, you want to perform other fixing methods, then move to the next part of the article.
Method 5: Reinstall the Problematic Device Drivers
After updating your Windows system, there can an instance that the device drivers may get corrupted. Therefore, you have to reinstall the device driver in order to fix the issue. Hence, you can proceed to the steps that are mentioned in the following section:
- From the Run box, open the Device Manager by typing the devmgmt.msc command.
- Once the Device Manager window opens, search for the problematic device driver.
- On finding it, right-click on it and then click on the Uninstall option form the list.
- Now perform all the on-screen instructions in order to complete the uninstallation process.
- As the process completes, restart the system.
- Once the system restarts, navigate to the device driver official website and then download the latest version of the device drivers.
- Install them and then check if the Windows error code still occurs or not.
As the last resolution, you can have a look at the next section of the article below.
Method 6: Rename the Software Distribution Folder
Sometimes, renaming the Software Distribution Folder has resolved the Windows error code for most of the users. The Software Distribution Folder is part of the Windows Update components that manage all the updates. Hence, to execute the process, you can follow the steps that are listed below:
- First of all, hold down the Windows logo key and the X key at the same time. Now, select the Command Prompt (Admin) option.
- As the black Command Prompt window opens, enter the following commands:
- First Command is: .net stop wuauserv
- Second Command is: net stop cryptSvc
- Third Command is: net stop bits
- Fourth Command is: net stop msiserver
- Hit the Enter key from the keyboard after typing each command.
- After that, navigate to the following path: ren C:\Windows\SoftwareDistribution
- Now, rename the Software Distribution Folder as SoftwareDistribution.old.
- After that, go back to the Command Prompt window and type the following commands:
- First Command is: net start wuauserv
- Second Command is: net start cryptSvc
- Third Command is: net start bits
- Fourth Command is: net start msiserver
- Also, press the Enter key after typing each command.
- Finally, restart your system.
Once the system reboots, you can check if the Windows error code is still there or not.
Hopefully, now you will be able to resolve the issue easily.
In the previous sections of the article, we have discussed all the possible solutions to fix the Windows update error code 80070103. Hence, now we hope that you have fixed the issue on your own. Moreover, you will not get this issue again.
However, if the issue still occurs, then you can get back to the professionals. You can also use the comment section below to get some solutions on how to fix this issue.