Windows 10 Error Code 0x80070035: 7 Effective Procedures To Fix It

Error code 0x80070035: the network path was not found is one of the issues which users encounter pretty commonly on their Windows 10 computers.

Microsoft enables the computers which are sharing a particular network to hold access to the files as well as data on the systems without cables. However, while trying to access information on the other computer, users may sometimes notice the annoying error code 0x80070035.

The next impulse of the users would be to seek immediate solutions in order to resume the otherwise smooth workflow like earlier.

But, to troubleshoot it, one must hold some basic knowledge regarding its indications along with the causes which induce the error. Only then would the process of troubleshooting be effective.

This article holds sufficient information regarding the essentials of the error as well as the effective solutions to resolve it in no time.

More About the Error Code 0x80070035: The Network Path was not found

Any error message puts a halt to the regular workflow of the users. This particular issue arises due to plenty of reasons.

One of the major causes which induce it is the action of the Firewall or the anti-virus software. At times, they tend to block the system resources.

The solutions are centered upon the potential causes which trigger the problem. Therefore, it is mandatory to know the causes if you desire to troubleshoot the error code on your own.

So, stick through the next section which holds the effective ways in which you can resolve the issue now that you have the basic idea regarding the complication.

7 Quick and Effective Methods to Fix Error Code 0x80070035 in Windows 10

The problem, like any other annoying error code, tends to stir a sense of confusion in the minds of the users.

However, if you have had a glimpse of the previous section which holds the fundamentals of the error, you should have guessed the point from where we would begin the solutions.

This guide is sufficient to troubleshoot it comprehensively if you incline on exercising our valuable walkthrough. Therefore, be careful while implementing them.

Method 1: Disable the Anti-virus or Firewall Temporarily

As mentioned earlier, the presence of anti-virus or the Windows Firewall tends to conflict with the Operating System.

Now, this is nothing new. It is a common trait of anti-virus programs to hinder the propagation of an application’s functions.

Usually, people simply launch the antivirus and then pause the process. Also, one could disable it for effective results.

In order to disable the Windows Defender Firewall, adhere to the underlying procedure.

• Firstly, press the Windows button as well as the R button in unison. This brings up the Run window wherein you’d have to type “Control Panel” and hit the Enter button.
• This would fetch the Control Panel and launch it. It will display a list of options from which you’d have to click on Windows Defender Firewall.
• Then, from the list which is on the left-hand side, proceed to click on the Turn Windows Defender Firewall Off or On.
• After that, for both Public and Private network, switch the radio key to turn Off the Windows Defender Firewall.
• Finally, hit the OK button in order to save the settings and then Restart the computer system.

Inspect if the problem is gone or not. If you notice that the issue lingers, then simply head to the next method.

If you find the solutions hectic to implement, you can seek the expert assistance of a technical professional.

Method 2: Reinstall Network Adapters Including the Hidden Adapters

In this procedure, we guide you to connect the PC or the system to the internet hard-wired. For this, follow the underlying procedures.

• Press the Windows key and the R button together in order to fetch the Run window. When the dialog box appears, therein you must type “devmgmt.msc” and then hit the Enter button.
• The command will bring the Device Manager, to which you must click on the View tab and then check Show hidden devices.
• Next, on expanding the list which holds the Network adapters, the hidden adapters tend to display the translucent icons which are light-colored.
• Then, right-click on the drivers and proceed to uninstall them. Finally, reboot the PC and inspect if the issue is resolved.

In this way, you can treat the annoying problem when Windows cannot access data on a shared computer and shows the error code 0x80070035.

But, if the issue lingers, then you can simply head to the successive procedure.

Also, you can seek the comprehensive and expert guidance of a technical professional.

Method 3: Enable NetBIOS over TCP/IP

• First, press the Windows key as well as the R button to launch the Run window. Therein, type the command “ncpa.cpl” After that, press the Enter button in order to launch the properties of WiFi.
• Next, right-click on the Wifi network and then proceed to choose Properties.
• After that, double-click on the Internet Protocol Version 4 in order to launch the Properties window.
• Then, click on the Advanced option and then head to the WINS tab.
• Now, choose the radio key at “Enable NetBIOS over TCP/IP” in the NetBIOS setting column.
• Finally, click on the OK option in order to save the alterations and then proceed to Restart the system.

This method is another effective one. If this too fails to bring about the changes that you want, the other method surely will.

Method 4: Turn On Network Discovery

• At first, press the Windows key as well as the R button in order to launch the Run window. Therein, type “Control Panel” to launch it.
• When the window of the Control Panel appears, proceed to click on Network and Sharing Center in order to launch the Network and Sharing Center.
• Then, from the menu present on the lefthand side, opt for the Change Advanced Sharing settings.
• After that, shift the radio key to the Turn on network discovery option. And then, inspect the box which states Turn On automatic setup of network connected devices.

Finally, reboot your system and then inspect if it resolves the issue which displays the error code 0x80070035: the network path was not found in your Windows 10 PC.

Also, you can easily seek professional aid if attempting these steps are problematic for you.

Method 5: Delete all Windows Credentials

In this procedure, we suggest you delete all the credentials for Windows. And its high effectiveness makes us add it to our list.

To do this, follow the dedicated steps mentioned underneath.

• First, press and hold the Windows key and then hit the R key as well simultaneously. Doing this brings up the Run window wherein you must type “Control Panel”.
• After hitting the Enter button, when the window of the Control Panel appears, make sure to select, from the options, the Credential Manager.
• Remove all the Credentials, in the section of Windows Credentials, and then proceed to Restart the computer system.
• And whenever there is a necessity, you can enter all the Windows credentials.
• Also, you can click on the Add a Window Credential on the same page as well as insert the credentials manually.

This method is sure to troubleshoot the issue at once. But, if it doesn’t and disappoints you, proceed to make an attempt with the next procedure.

.

Method 6: Transform the Network Security

• Firstly, press and hold the Windows key and then hit the R button on the keyboard in order to summon the Run dialog box.
• Therein, type “secpol.msc” and then press the Enter key. This would launch the window of the Local Security Policy.
• Then, navigate to Local Policies and then to the Security Options.
• After that, on the right-hand side, double-click on it in order to launch the Properties for the Network Security: LAN Manager authentication level.
• Next, from the drop-down menu, proceed to choose Send LM & NTLM-use NTLMv2 session security if negotiated.

Now, this method is sufficiently effective in troubleshooting the problem from the core. However, at times, people tend to notice the Windows cannot access error code 0x80070035 even after trying the procedure.

This is when you must head to the next solution.

Moreover, you can also keep other options like seeking professional assistance open if you find no result with these procedures.

Method 7: Using Command Prompt

Another effective method is by employing the Command Prompt. One of the basic ways is through this.

However, to troubleshoot the problem, make sure to stick to the underlying steps and be careful while implementing them.

• Firstly, press the Windows key along with the R button simultaneously. Then, in the Run window, type “cmd” and hit Enter.
• In the Command Prompt, type the commands each followed by pressing Enter.

“ipconfig /release”

Then, “ipconfig /flushdns”

“ipconfig /renew”

• Then Restart the system and then inspect if the issue lingers. If it does lurk, type the commands

“ipconfig /flushdns”

“nbtstat –r”

“netsh int ip reset”

“netsh winsock reset”

After that, proceed to Restart the PC.

Wrapping Up

In this way, you can resolve the issue in a hassle-free manner. We incline on recommending users to try their own hands on any technical issue first.

Doing it on your own saves you from spending huge on the fixing of the computer system. Also, you tend to learn something.

And only if the problem lurks behind even after trying all the possible methods, should they move on to the last resort that is consulting the technical experts.

They can troubleshoot the Windows cannot access error code 0x80070035 with ease thanks to their specialization.