PC Turns On But No Display | 5 Solutions To Resolve The Issue

Isn’t it quite annoying when you turn on the PC but the displays stay blank, showing nothing? The primary factor responsible for this error is either a video cable or connection problem. 

Also, you might confront this “pc turns on but no display” issue for major or minor hardware issues on your computer. Every electronics device undergoes technical breakdown once a while and your PC is no exception. 

Hence, the best way to solve it is to troubleshoot it accordingly. We can help you to reach the proficient methods to fix the problem at the earliest.

[Solved] PC Turns On But No Display or Beeps Sometimes

Many users wanted to know what to do if the computer turns on but no display, now you have the answers. You can fix it easily with the discussed solutions. To proceed, follow the methods mentioned below:

Fix 1: Check if the Monitor is On

When you encounter this “pc turns on but no display” issue, you should check whether the monitor is working properly or not. To verify whether the monitor is turned on or not, check the power light of the monitor.

If you do not find the power light turned on, then disconnect the power adapter of the monitor and reconnect it back to the power outlet.

But, in case, the problem is still there, then you need to replace it. But before that, go through all the methods mentioned below and locate the best-suited solution.

Fix 2: Reconnect the Monitor to the System

You need to check whether the monitor is properly connected with the system or not. Because, sometimes, the poor connection between the monitor and the system leads to this situation. Thus, reconnecting the two devices is the best solution. Here is how you can proceed.

Step 1:

At first, press the Power button and hold it for a few seconds to turn off the system. Now, disconnect the video cable that is connected with your device.

Step 2:

Now, check the port connectors which builds the connection between the computer and the monitor. Now, check whether the video cable is faulty or not. If the video cable is not flawed, try to reconnect the system to the monitor.

Step 3:

Otherwise, change the video cable and then connect the two devices with a new one. Now, try to turn on the system and check whether the monitor is showing any display or not. 

Fix 3: Disconnect the Peripherals

A certain number of people reported that peripherals connected with the device can also lead to a conflicting environment, leading to this annoying problem.

Therefore, you should disconnect the peripherals that are connected with your device and check whether the problem gets resolved or not.

First of all, press the Power button and turn off the PC. Now, disconnect the peripherals such as a printer, scanner, keyboard, external hard disk, etc. Wait for a while and turn on the system to see whether the display is showing properly without any beep sound.

Fix 4: Reinstall the RAM

If the computer turns on, but no display on the monitor, then check the connection between the RAM and the motherboard. If the connection between the RAM and the motherboard is lost, then you should rebuild the connection between them.

To re-establish the connection, take a glance at the following section.

Step 1:

First of all, turn off the system by pressing the Power button. Now, disconnect the AC power cord from the power socket and open the computer case gently.

Step 2:

Now, separate the RAM from the memory slot. Then, clean the RAM to eliminate any foreign particle attached to it, using an eraser.

Step 3:

After that, place the RAM in its original position properly and reconnect the AC power cord to the power socket. Switch On the PC and press the Power button to verify whether the problem gets resolved or not.

Fix 5: Reset the BIOS Settings to Default

If you note that improper BIOS is responsible for no beep sound when the computer starts issue along with no display then go through the following steps.

Initially, press the Power button and hold it to turn off the system. Now, disconnect the AC power cord from the power supply and open the computer case.

Now, remove the CMOS battery using a non-conductive screwdriver gently. Take out the battery and keep it outside for a few minutes. Then, reinstall the CMOS battery again properly. After that, connect the AC adapter and turn on the system.

Lastly…

We hope all the above 5 solutions would help to get rid of the problem associated with the PC. If you have any doubts then leave your comments in the feedback section. Further, for more tech-related articles visit our website.