The Nintendo switch error code 2110-3127 occurs when the switch fails to connect with wireless or wired devices. A series of check is required whenever you connect the system to a network. Verification of the internet connection, check the DNS settings are just a few components of these checks.
If any of these components fails to meet the requisite demand then you get an error notification. This error comes with the message “Connection test failed. Could not perform DNS name resolution. Please try again later”.
If you encounter the same error, then this guide can help you a lot. Here, you will get to know the easy tips and tricks which can help you to eradicate this error. So, let’s begin.
What Causes the Nintendo Switch Error Code 2110-3127?
The Nintendo switch error code 2110-3127 mostly occurs due to internet connectivity issues. But still, there are some other factors that can lead to this error.
If there are any problems within the DNS settings, then you become unable to connect with the internet. If there are incorrect security protocols like WPA2-PSK or WPA-PSK that configured then you can receive this error.
Nintendo Switch helps the users to track all the network access configurations. Due to the misconfigurations of Nintendo Switch, you might encounter this error.
Nintendo Switch Error Code 2110-3127 Fix: Easy Hacks
Before you proceed you need to ensure that your device is not connected through public Wi-Fi. Now, you should perform the solutions explained below:
Fix 1: Power Cycling the Nintendo Switch
If the Nintendo switch contains any bad network configurations, then you can solve this by reconnecting with the network. To do this, you should follow the steps stated below:
- First and foremost, press the Power button of the device. Hold it for a few seconds until you will see a new pop-up window.
- Choose the ‘Power Off’ option and shut down the device. Now, wait for a few minutes and turn the device On.
Once the device turns On, you should connect with a stable and secure network. Then, check if the issue is resolved, otherwise, move on to the further solutions stated below.
Fix 2: Enter the DNS Settings Manually
DNS or Domain Name System helps the device to access the internet. Hence, if the DNS is not working normally, then you should try to set the DNS settings manually. Finally, check if the problem is fixed. Here is an example of how you can use Google’s DNS.
How to Enter the DND Settings Manually?
- First of all, you need to go to the Network Settings that you are trying to access. Afterward, choose the ‘DNS Settings’ option from the next page. (This process is automated by default, but here you need to enter the DNS manually).
- Next, you have to type the details of DNS given below:
DNS Settings: Manual.
Primary DNS Server: 184.108.40.206
Secondary DNS-Server: 220.127.116.11
Lastly, save the changes and close the window. Now, you should try to connect with the network and check if the problem resolved.
Fix 3: Change the Security Settings
According to some users, they have fixed this error by changing the security settings of the network. Hence, you need to switch the network from WPA2-PSK to WPS-PSK.
This unusual behavior indicates that there are some errors in the Switch that get repaired once you reset the configurations. Here are the steps you should perform to do this:
- In the beginning, go to the Network Settings and tap on the ‘Security’ option. It is set to the WPA2-PSK by default. Then, choose the ‘WPA-PSK’ option.
- Next, type the password and tap on the Save button to save the Network settings. Afterward, navigate to the Security settings and choose the WPA2-PSK option.
- Again enter the password and tap on the Save button to apply the changes.
Lastly, you should exit from the Network Settings window and restart the system. After that, you should check if the problem has been fixed.
Fix 4: Verify the Network Connectivities
After performing all the above hacks if you see that the Nintendo switch error code 2110-3127 still persists, then there must a problem within the network itself.
At this juncture, you need to connect to the internet through the same network using another device. You can check if the error gets solved or not.
If it is not, then you should try to connect the Switch to another router or network. Check if the error continues. If it doesn’t, then it indicates that there is a problem with the router. You can solve it by resettings the settings of the router.
Furthermore, if there are any issues with the Internet Service Provider then connect with them and fix the problem at once. Finally, connect the switch and verify whether the problem persists or not.
These are the probable ways to get rid of the Nintendo switch error code 2110-3127. We hope if you successfully execute the above ways in their corresponding order, then it will surely help you. Additionally, you can share your valuable feedback in the comment box.