Nowadays, playing online games has become a trend. But while playing online games, you may confront the error message “IRQL_NOT_LESS_OR_EQUAL” in Windows 10.
However, it is quite natural that a huge amount of power is required to meet up with the required performance of a gaming PC. Now, this is exactly the case for most of the computers which are unable to handle excessive pressure.
The IRQL_NOT_LESS_OR_EQUAL is most likely a blue screen error message that a lot of Windows users have complained about. If proper remedial methods are not implemented, then it can be a very hectic error to deal with.
Probable Causes for IRQL_NOT_LESS_OR_EQUAL in Windows 10
This error appears when the users update the system into a new version. There are multiple reasons that might be responsible for its occurrence.
Incompatible device drivers, poor driver installation, registry issues, and viruses are other real reasons for the cause of this error.
Faulty hardware and even the Windows upgrades are to be blamed for the rise of this IRQL_NOT_LESS_OR_EQUAL error. Similar to other Windows errors, the poorly installed drivers can also result in this issue.
In this post, you will find various methods to resolve the error message that you will confront many times. Hence, keep reading this article.
Solutions to Fix IRQL_NOT_LESS_OR_EQUAL in Windows 10
IRQL_NOT_LESS_OR_EQUAL is a BSOD or Blue Screen of Death error which appears on devices that have a Windows operating system, installed in them.
Well, this is the time to get rid of the error. So, read on to find out exactly what to do to resolve this issue.
Fix 1: Start the System in Safe Mode
A certain number of people reported that Windows offers the possibility to start the system in the so-called Safe boot configuration.
Go through the following section to start the Windows 10 in Safe Mode
First of all, press the Start button and then click on the on-screen power button to restart the system. When the system wakes up, select the Advanced option under the Troubleshoot section.
After that, select the Startup Settings option and then press the Restart option again. Wait until the Windows system restarts and then choose the Safe Mode option there.
When the process gets completed, check whether the process gets resolved or not.
Fix 2: Check the Memory and Hardware
Sometimes, the problem is related to memory and hardware as well. Therefore, you need to check the hardware and memory with the help of the Windows Memory Diagnostic utility. This is an in-built tool for Windows.
To run this tool, follow the steps mentioned in the section below.
At first, press the Start button and then type ‘Memory Diagnostic’ in the Windows search box. Hit the Enter button to launch the Windows Memory Diagnostic utility on your device.
A new window will open popping two options. The first option is there to restart the system and the other one is to check whether the RAM is working properly.
Select the second option to check the RAM. if the scan result does not yield to any errors, then the problem might present elsewhere. Hence, follow the next methods.
Fix 3: Repair the Registry to Solve the Damaged System Files
As we mentioned in the earlier section that the problem may arise due to the corrupted system files. Hence, you should check the files and repair the damaged files, present on your device.
The simplest and quickest way to check the damaged files is to run the System Files Checker tool. Follow the steps, mentioned in the next section.
At first, press the Start button and then type ‘cmd’ in the search bar.
Now, right-click on the Command Prompt box, appeared on the search result and select the “Run as Administrator” option from the list.
After that, type ‘sfc /scannow’ in the command box and hit the Enter button to launch the System File Checker tool.
When the tool starts the scanning process, wait until it gets completed. As the process is done, restart the system.
So, the corrupted files are repaired properly. Now, check whether the error message still persists or not.
Fix 4: Remove Problematic Software
A certain number of applications can also cause the error message IRQL_NOT_LESS_OR_EQUAL in Windows 10. To fix this error, you need to delete them from your device.
Certain VPN and encryption applications can cause a BSOD error. So if you are using any such VPN tools make sure that you have removed them timely from the system.
Additionally, it is worth mentioning that some third-party antivirus software can often cause this annoying situation.
Therefore, you should check whether any third-party applications are installed on your device or not. If yes, then remove them from the system as well.
After uninstalling them, restart the system and check whether the problem gets resolved or not.
Fix 5: Run a Full System Scan
If the above solutions are not able to solve the issue, then you need to scan the full system. To scan the entire system, you should run the Windows Defender tool.
This is also a default tool of Windows. Hence, to run this tool, follow the given steps.
First of all, press the Start button and then type ‘defender’ in the search bar. Hit the Enter button to launch the Windows Defender tool.
A new window will appear on the system screen, choose the Shield icon from the left panel of the screen.
Now, select the Scan option from there and click on the Full Scan option. When you click on it, Defender will start scanning the entire system.
It will take some time to complete the process. When the process gets completed, now you have successfully solved the issue.
In this post, we explored the best methods to deal with the error message IRQL_NOT_LESS_OR_EQUAL in Windows 10.
We hope that these guidelines managed to resolve your problem. Please feel free to let us know if you found this article helpful. You can do it by leaving a comment in the section.