[ Solved ] iPhone Error 4013 | Step By Step Guides

The iPhone error 4013 is a very common occurring error which occurs due to a faulty cable or a faulty port. In addition to this, if there is a connectivity problem between the PC/Mac and the iPhone, then also this problem might irritate you.

 

Once you notice this error code, then an error message saying ‘The iPhone could not be restored. An unknown error occurred (4013)’ continuously pops up on the screen.

 

There are lots of ways through which you can eliminate the error. So, if you want to remove this error code from your device, then read this passage from top to bottom. 

 

In this article, we are going to discuss some proven techniques that will surely make your task easier.

Know-How to Fix iPhone Error 4013 within a Flicker of Time:

If you encounter iPhone error 4013 on your system, then do not panic. Just go through the undermentioned solutions to eradicate the problem on your own.

Solution 1- Restart the iPhone

No matter whether you are using an iPhone, or any other device, restarting your system can remove lots of error codes. Error code 4013 is undoubtedly included on the list. Hence, it is highly recommended to try this solution. 

This solution can be quite easy if you successfully perform the following steps.

Step 1

In the beginning, you need to disconnect the iPhone from the computer and reboot it. 

For that, you need to press and hold down the Home and Sleep/Wake button together for at least 15 seconds.

In case, you are using iPhone 7 or 7 plus, then you have to press and hold down the Volume Down and Sleep/ Wake button together. 

Step 2

Once your iPhone device has been successfully restarted, then reconnect it to the computer. Then, check if the issue still persists or not.

Solution 2- Check the Cables

Occasionally, a faulty cable can lead to to the iPhone error 4013. Thus, to resolve the error, we suggest you use another cable to connect your computer/Mac to the iPhone.

If the error cod3 4013 does not appear on the screen, then it simply means the previous cable was faulty. So, leave the cable and get a new one.

Solution 3- Check the Port

Sometimes, due to the damaged port, you might receive this error code. In these cases, we suggest you check the port. Now, take a look below.

Way 1

Firstly, we suggest you, try to connect the iPhone with a different port. After that, check whether the error code still persists on the screen or not.

Way 2

If not, then it proved that the port was damaged and you need to replace it with a new one. 

 

However, if you fail to wipe out the error this time also, then move to the next solution without wasting any further time.

Solution 4- Check the Wi-Fi Connection

Slow or poor Wi-Fi connection can also lead to this error. Therefore, you should reset the Wi-fi connection.

For that, at first, disconnect the Wi-fi connection from both the computer and iPhone. Next, you should wait for a while and then try to reconnect the network. 

In case, you are still getting this issue, then connect a different Wi-fi network if available.

Solution 5- Update the iTunes Application

iTunes should be updated in order to avoid this issue. In case, you are not aware of the updating procedure, then here is how to do it.

How to Update the iTunes on Computer?

Firstly, you have to launch the iTunes application. Once it opens, then move to the Menu bar and select the Help option.

From there, you need to click on the Check for update option. Then, follow the online instructions to complete the updating procedure.

How to Update the iTunes on Mac?

In case, you are a Mac user, then first, ensure that you have to quit from the iTunes application. After that, open the Mac App Store. 

Then, a new page will pop up on the screen. Here, you should drop down and click on the Update tab option.

Now, the App store starts searching for an update. In case, any update is found, then it will display an Update button. Click on the button to complete the update procedure.

Solution 6- Reset the All Settings

So, you have already applied the above five solutions and none of them work for you, right?. Don’t worry, here we have explored another solution for you.

Now, have a glance at the below points to wipe out the iPhone error 4013.

 

1. The first thing that you should do is to restart the iPhone. 

 

1. Then, navigate to the Settings option. From there, you have to move to the General settings option.

 

1. Thereafter, click on the Reset option. 

 

1. Under this section, you have to tap on the Reset all settings option. After that, enter the password, and click on the OK button.

Wrapping Up

iPhone error 4013 is a common technical glitch experienced by iPhone users. We believe that by applying the above six solutions, you can quickly get rid of it. 

In case, you want any type of discussions related to this topic, then feel free to visit the comment section.