How to Fix Error 0x8007045d On Windows OS [A Step-by-Step Guide]
Error 0x8007045d usually appears while you are trying to burn a DVD or while opening the storage device. Sometimes, this issue also occurs while trying to transfer files from one storage to another.
Generally, this error indicates that Windows has failed to transfer a file that is not compatible or available on the system. This error doesn’t have a long-term effect on the system.
But, if the hard disk you are using is damaged or if it has bad sectors, then this error can affect the overall integrity of the files that are saved on it.
This error might arise due to several reasons. A broken USB port often causes this error. If the DVD disc of the system gets corrupted, then it can also lead to this error. Subsequently, due to a corrupted memory module or damaged Windows registry, you can also meet this error.
If you are struggling with the same error, then this article can help you a lot. Here in this post, we are going to present the easy hacks which can help you to fix this error in minutes. So, you need to take a quick look at the guide discussed below.
Indicators of Error 0x8007045d
As we mentioned earlier, the error code 0x8007045d may appear in various forms. So, it is important to detect the different indications. Let’s have a look:
- “Windows cannot install required files. Make sure all files required for installation are available and restart the installation. Error code: 0x8007045d.”
- “The request could not be performed because of an I/O device error (0x8007045d).
Please rerun backup once the issue is resolved.”
- “The request could not be performed because of an I/O device error (2147943517)
Please rerun backup once the issue is resolved.”
In whatever form the error appears at first you need to fix the problem at the earliest. Thus, the next section will help you.
Solved Error Code 0x8007045d: 5 Quick Hacks
There is nothing to be worried about this error. Performing these troubleshooting hacks explained below will eradicate the error.
Solution 1: Run the Computer in Safe Mode
Before going to perform any complicated solution, you need to boot the system into the Safe mode.
How to Boot the system into the Safe Mode?
- Hit the R and Windows key both at the same time from the keyboard and type “mscconfig” in the Run Command box to open the System Configuration tool.
- Navigate to the Boot tab and choose the Safe Boot option from the next window. Click on the OK button to make the changes.
- Now, the Windows prompts you either to Restart or Exit without restart.
Once the system enters the Safe Mode, try to copy the files to check if the booting process is completed successfully.
Now, you can put the system into the Clean Boot mode. It can help you to identify the third-party app that triggers this error. Afterward, you can easily solve that issue.
How to Put the System into Clean Boot State?
- First, open the System Configuration Tool by performing the same steps stated earlier.
- Now, navigate to the General tab and choose the ‘Selective Startup’ option. Then, untick the ‘Load startup items’ option from the next page.
- Go to the Services tab and check the ‘Hide all Microsoft services’ box. Afterward, tap on the ‘Disable all’ button.
- Click on the OK button and restart the system.
- Once the computer startup in a clean state, you have to try to copy the files that failed previously.
If it works, then you will be able to locate and uninstall the faulty apps of the computer. Afterward, if you want to get out of the clean boot mode, then you need to repeat the same steps and hit the Enable options.
Solution 2: Using Disk Check Utility
Sometimes, P2P apps come attached with corrupted clusters while downloading any file. This can lead to the error code 0x8007045d. You can solve this easily by running the Disk Check tool on the hard drive.
Here are the steps you can perform to do this:
- First, go to the Start menu and type “command prompt” in the search bar.
- Then, right-click on the search result and choose the ‘Run as administrator’ option from the list. It will open the Command Prompt window with admin privileges.
- Afterward, type “chkdsk e: /F /R /X /B” in the command line and hit the Enter key from the keyboard to execute the command.
- Once the scanning process is completed, restart the system.
Now, you need to try to copy the files again and check if the error has been fixed. Else, you need to update the device drivers to get rid of this error.
Solution 3: Update the Device Drivers
You can also solve this issue by updating the drivers of the device. To do this, you need to perform the steps mentioned below:
- First of all, open the Run box and type “msc” in the Run box. Hit the Enter key to proceed further.
- Now, locate the problem and right-click on that. It could be Universal Serial Bus Controllers, IDE ATA/ATAPI controller, DVD/CD-ROM Drives.
- Tap on the ‘Update Driver Software’ option and complete the updating process by performing the on-screen prompts.
[Note: To complete the updating process, it is essential that the device is connected with a secure network.]
Solution 4: Shrink Hard Drive Volume
Shrink the volume of the hard drive to eradicate the error 0x8007045d. To perform this, simply follow the steps given below:
- First, make sure that you are logged in with the admin privileges.
- Then, open the Control Panel by going to the Start menu.
- Navigate to the ‘System and Security’ section.
- Tap on the ‘Create and format hard drive partitions’ option.
- It will navigate you to the Disk Management window.
- Afterward, right-click on the drive where you want to shrink.
- At last, tap on the ‘Shrink Volume’ option.
After shrinking the hard drive if you see that the issue is still unresolved, then move on to the next solution.
Solution 5: Reset and Restore
If none of the above solutions help you to get rid of this error, then you can solve this by resetting the computer. To reset the system, first, you need to open the Start menu.
Then, click on the Settings (gear-shaped) icon. Next, navigate to the ‘Update and Security’ tab and tap on the ‘Reset PC’ button.
Wait for a few seconds until the resetting process completes. Afterward, restart the system and check if the issue has been fixed.
Here you get to learn how to fix the error code 0x8007045d and the solutions to solve it. We hope, after executing the above procedures in their corresponding order, you will surely put an end to this error. In addition, you can also share your queries or doubts through the comment section.