Error code 0xc1900101 is an installation error that appears while upgrading or installing Windows 10. The entire process of up-gradation from the previous build-up to the newer version is always completed without any difficulty.
However, when users use media creation to do so, they often face 0xc1900101-20017.
Therefore, let’s take a thorough look into some of the solutions cited in this segment to fix this error 0xc1900101-20017 easily.
Proven Fixes for Error 0xc1900101-20017:
The causes of this particular error can be innumerable. Thus, to solve this error we have mentioned some of the solutions below. Take a thorough look and implement the solutions accordingly to fix error 0xc1900101-20017.
Fix 1: Disable or Uninstall any Firewall, Antivirus as well as Other Utility Tool
If you have any third-party software installed or enabled on your system, the occurrence of error 0xC1900101 – 0x20017 is quite relatable. This can include any antivirus, firewall, or security software. Thus before moving on to the upgrade process, make sure to uninstall these tools from your system. This procedure has helped many users to resolve this error without any difficulty.
Disconnect External Devices
Although it sounds a bit common, there have been instances where this solution has worked for many. Thus, try to disconnect all the external devices like mouse, keyboard, and gaming accessories and then see whether this step worked for you or not.
Upgrade your BIOS
Windows 10 installation errors can also be a result of your BIOS, thus to get rid of this issue, make sure to upgrade your BIOS to the current version of it.
To perform this step, visit the website of your motherboard’s manufacturer and download the latest version of BIOS
However, this upgrade needs to be done with caution. Thus, check for the instruction manual for a step by step guide to it.
Fix 2: Uninstall Problematic Drivers (Including Wireless and Bluetooth)
Make sure to uninstall any wireless or Bluetooth drivers as many times this can be the reason behind such error as well. Hence, uninstall these problematic drivers before upgrading. To do so, follow the steps as cited below.
- Firstly, press Windows+R and type devmgmt.msc. Now, press Enter to launch the Windows Device Manager.
- After that, look for the problematic driver and uninstall it. To do so, right-click on the driver’s name. Also, if you spot any driver with a yellow exclamation mark, uninstall it as well. Try to perform the installation or up-gradation process to check whether this solution helped you solve the error.
Fix 3: Connect your Hard Drive to SATA port
Another way by which you can fix this error is just by connecting the hard drive or SSD to the SATA port. Many users say that using SATA 2 can be the effective cause behind such error.
SATA 2 ports are faster but there are chances of your hard drive or SSD not working on using it. Thus, for an easy fix, you should disconnect the hard drive or SSD and connect it back to the SATA port. This might also help you to get rid of this error hassle-freely.
Remove Any Additional RAM or Network Card
Extra Ram can be another reason for 0XC190010 – 0x20017 error, thus to get rid of it without any hassle make sure to remove one RAM module. Following that, install the Windows 10 again.
Users have complained that there are many wireless adapters that are incompatible with Windows, thus for the installation process, it is required to remove the adapter from your system.
However, if your system is under warranty take it to the official repair center. Removing the wireless adapter has always helped the users to install the Windows 10 easily.
We hope the solutions cited above would help you resolve this windows update error 0xc1900101 without any hassle. Make sure to let us know your experience in the comment section below.