Your PC Ran Into A Problem And Needs To Restart Windows 10 Loop: Quick Fixes

Windows 10 OS comes up with various latest features and improvements compared to its previous versions. However, it doesn’t mean that it is completely glitch-free. Windows 10 users encounter major to minor issues from time to time. 

“Your PC ran into a problem and needs to restart Windows 10 loop” is one of the most annoying notifications that users come across quite often. When users get stuck with such an error condition, they tend to become anxious and seek immediate solutions to overcome this. But, it is not the correct manner to troubleshoot any error in Windows 10.

So, before proceeding with the troubleshooting section, you must acquire some knowledge about the error and events that generate it. If you are experiencing this issue, keep reading this post. 

In this article, we are going to provide all the information along with the reliable workarounds to deal with this error. 

Why You Get This Error On Windows 10?

Various factors can influence this laptop error. But, in this article, we are going to mention the most obvious ones. So, follow this section and know the root causes of this error.

  • Corrupted system files are the foremost reason behind the error.
  • Outdated or damaged device drivers can also influence this error.
  • Some of the users face the error due to the incorrect or wrong registry settings.
  • The incomplete installation of Windows OS can also lead to such device error.
  • Further, virus or malware infection can be another potential cause of this issue.

These are the most annoying factors that can lead to the Your PC ran into a problem and needs to restart WIndows 10 loop error message. Apart from these factors, many users come across this error message due to the third-party security software.

Effective Ways To Resolve the Laptop error

Whenever you find that your PC ran into a problem and needs to restart, follow the underlying methods to overcome this issue.

Method 1: Boot the PC in Safe Mode

The very first step you should take is to reboot your Windows 10 device in Safe Mode. A majority of affected users claim that after booting their device in Safe Mode, the error message gets removed. Therefore, y0u can also give it a try. 

To enter into Safe Mode, follow the undermentioned steps.

Step 1: Press the combination of the Windows logo + I key. This process will launch the Settings application. Under the Settings window, go to the “Update and Security” section.

Step 2: Now, in the “Update and Security” section, choose the “Recovery” option located in the left pane of the window.

Step 3: Then, navigate to the “Advanced Setup” section and select the “Restart Now” button from the appeared menu.

Step 4: After that, you will find a list of options. From the list, choose “Troubleshoot” and go to the Advanced Options.

Step 5: Now, under the Advanced Options, click on the “Startup Settings”. Finally, hit the “Restart” option from the Startup Settings.

Step 6: Thereafter, a list of options appears on the screen. Here, you can choose the desired version of Safe Mode.

Now, boot your device in Safe Mode, and verify if the error gets eliminated from your Windows 10 device.

Method 2: Try to Run System File Checker

Sometimes, corrupted or missing system files leads to such error. Therefore, it is recommended to run the System File Checker. Implementing this tool can be highly effective, as it can detect if there is any corrupted or missing system file. It can also troubleshoot the issue by repairing the files with ease.

To apply this fix, follow the steps underneath.

Press the Windows logo along with the X key. It will invoke the Win+ X menu. Under this menu, choose the “Command Prompt (Admin)” to launch the Command Prompt in Admin Mode. 

In case, you don’t find the option, you can also choose “PowerShell (Admin)” from the same window. Once the Command Prompt opens with the Administrator’s privileges, hit the Enter key after typing the command. “SFC/scannow’.

After performing this step, System File Checker will start to scan your entire device and look for the corrupted or missing system files. Keep in mind, this process may take a while to complete. 

If it finds any corrupted or missing system file, then it will repair them automatically. When the process is over, simply reboot your device to let the new changes take effect.

Method 3: Use DISM Utility

If System File Checker fails to detect and repair the missing or corrupted system files, you should use the DISM utility. This is another built-in feature, specially designed for repairing the corrupted system files.

To run the DISM scan, open the Command Prompt in Admin Mode by following the above steps. Once the Command Prompt invokes in Admin Mode, enter the following command in their respective manner. Also, do not forget to hit the Enter key after entering each command.

  • Command 1- Dism /Online /Cleanup-Image /ScanHealth
  • Command 2- Dism /Online /Cleanup-Image /CheckHealth
  • Command 3- Dism /Online /Cleanup-Image /RestoreHealth

After executing all the commands, proceed to reboot the device. This will make the modifications effectively.

Method 4: Reset the Memory Dump Files

To analyze the issue in a better manner, it is recommended to reset the memory dump files. After settings memory dump files, the error might be resolved.

Step 1: 

First, press the combination of the Windows logo + S key. Then, invoke the Advanced System window. Under this window, choose the “View Advanced System Settings” option from the resultant menu.

Step 2: 

Thereafter, go to the Advanced tab, which is present at the upper side of the “Properties” window. Next, navigate to Settings and expand the “System failure” section.

Step 3: 

Under this section, you need to locate the “Automatically Restart” option. Once you find it, tap on it to uncheck the checkbox. 

Step 4: 

After that, hit the drop-down menu which is under the “Write debugging information” topic. Next, choose the “Complete memory dump” option from the left pane of the window.

Step 5: 

Once you are done, hit the Apply button as well as the OK button to save the new modifications. 

Hopefully, after resetting the memory dump files, “Your PC ran into a problem and needs to restart” error gets eradicated.

Method 5: Update the Device Drivers

You can come across “Your PC ran into a problem and needs to restart windows 10 loop” if you outdated or incompatible device drivers. In such situations, you have to update the outdated or faulty device driver. To do so, follow these steps.

  • Launch the Device Manager window. Once the new window opens, locate the faulty or outdated drivers and right-click on it.
  • Then, choose the “Update Driver” option from the queue window.
  • After that, select the “Search Automatically For Updated Driver Software” option from the appeared menu.
  • If updates are available, hit the “Install Update” button to obtain the newest version of device drivers.

When the process is over, reboot your device and check the status of PC error.

Additional Tips:

Here, you will get some additional tips that will help you to avoid such kind of laptop error. So, take a glance below.

  • Always install the reliable and latest version of software/OS
  • Run anti-malware scans regularly
  • Try to avoid installing third-party security software

Concluding Remarks:

This post brings all the essential details regarding this specific laptop error. We hope, after following this post, you will be able to resolve this error on your own. The above-mentioned solutions can be applicable if you come across “Your PC ran into a problem and needs to restart RAM, overclock, overheating” error message.

In case, you face any kind of trouble while performing the fixes, you can post your difficulties in the feedback section below.

If you have any other tips to resolve this issue, feel free to share them in the comment section.