[Solved] Canon Printer Error Code 1403

Do you find Canon printer error code 1403 in the Control panel of your Canon printer? Well, then probably the responsible factor is an issue with the printer’s print head.

Also, if any available cartridges are damaged or you are unable to move the printhead, this error might arise. Another probable reason for which this error might trigger is the improper installation of the print head.

Apart from that, an outdated printer’s driver is also sometimes responsible for this annoying issue. Moreover, an issue with the ink cartridges also causes this error code.

In case, if you are getting the same issue, then no need to panic. Here we have listed some of the effective solutions to get rid of this situation.

Easy Troubleshooting Methods to Fix Canon Printer Error Code 1403:

If you are frequently getting this error code while doing some important work on the printer, then this article will help you to deal with this error code.

Fix 1: Restart the Canon Printer

To rule out this problem, you need to restart the Canon printer. This is the simplest process to eliminate the error code.

Hence, you should try to apply this method in order to resolve the issue. Therefore, follow the steps mentioned in the section below.

Step 1

First of all, you should disconnect the cables that are connected with the printer along with the system.

Step 2

After that, disconnect the USB cables from the printer and then open the lid from the printer by holding it.

Step 3

Wait for a few seconds and then reconnect all the cables that you have disconnected earlier. After successfully reconnecting the cables, check whether the problem gets resolved or not.

Fix 2: Clean the Ink Cartridges

It is often the case that this error code arises due to a problem with the ink cartridges. There can be any foreign particles such as dust or any congested particles that can prevent the printer to print documents.

Apart from that, if in the ink cartridges there was not a sufficient amount of ink, then this error code appears.

Hence, you should clean the ink cartridges. To perform so, at first, you need to remove the concentrated or dried-up ink from the ink cartridges.

However, you should use a clean cotton swab to clean the ink cartridges. It is advisable not to use impure water to clean the dust. After cleaning the dust properly, place the ink cartridges properly in its place.

Hope, this may help you solve Canon printer error code 1403; otherwise, move to the next solutions.

Fix 3: Change the Canon Printer Settings

According to the users, the error code mainly appears in the Canon MG7520 model. They have reported that the inappropriate settings of the printer can often cause this Canon MG7520 printer head error.

Therefore, to resolve the issue, you should check the printer settings and change it accordingly. Follow the steps mentioned in the section below to change the printer settings.

Step 1

First of all, navigate to the Device and Printer section and then click on the Printer icon present there. Some instructions will pop-up on the screen.

Step 2

After that, you need to prefer the correct one. To confirm the action, click the OK button. The printer Properties window will pop-up on the screen. Therefore, from there, change the Printer Properties option.

After successfully changing the printer settings, close the tab and then restart the computer. Now, check if your printer problem gets resolved or not.

Fix 4: Update the Printer Driver

An outdated printer driver can cause this annoying issue. Hence, you should update the printer driver from the Device Manager section. Therefore, follow the below-mentioned section to apply the steps.

Step 1

At first, move to Device Manager section by pressing the Start button. Therefore, locate the Printer Driver under the Device Manager section.

Step 2

Right-click on the Printer Driver section and select the Update the Driver option. Now, it will automatically search whether any updated version is available or not.

Step 3

If found, then download the latest version and install it on your device. The installation will take time to complete. 

When the process gets completed, restart the system and now you can easily print your documents with the Canon printer.

Final Recommendation

That’s all! Here, we have shared all the possible solutions that are sufficient enough to resolve the Canon printer error code 1403. In case, if you found any difficulties while performing the above methods, please inform us by commenting in the comment box below.