5 Tips and Tricks to Fix Acer Laptop Wi-Fi Connection Error

While you are trying to connect your Acer laptop to a wireless network, then encountering connection error is quite possible. 

In most of the cases, the interface error between the laptop and Wi-Fi creates an internet stability error. 

As a result, you get an error message, “Acer laptop Wi-Fi keeps disconnecting” on your screen. 

The main culprit is the outdated adapter or an invalid signal. 

Even, you can even encounter the same if you enable the network adapter power-saving mode. 

Besides this, the device compatibility error, outdated operating system are responsible for this annoying issue. 

However, you can mitigate this particular error by following the steps discussed in this error.

Troubleshooting Steps to Fix Acer Laptop WiFi Keeps Disconnecting Error:

Various solutions are there to fix the Wi-Fi connection problem with ease. So, if you are experiencing the internet issue, then restart the wireless router. 

Therefore, if the same problem arises, then see the below and avoid the Acer laptop internet randomly disconnecting issue confidently.

Solution 1: Update the Network Driver

The outdated network driver issue is a common issue that is responsible for making the Acer laptop Wi-Fi connectivity problem. 

The one and the only way is to install the driver in the latest version to overwhelm the Wi-Fi toggling issue. 

  1. Type “devicemgmt.msc” in the search box and hit the Enter key to launch the Device Manager window.
  2. Then, locate the Network Driver icon and expand it. Now, click on the WAN driver’s name and right-click on it.
  3. Then, select the Update driver option from the pop-up menu that appears on the screen.
  4. Next, follow the instructions given on the resultant page and click the OK button. 
  5. Finally, click on the Finish button and exit from the window. 
  6. Now, check whether the Acer laptop keeps disconnecting from WiFi in Windows 10. 

Solution 2: Set Network Driver in Compatibility Mode

After a successful installation, you have to install the new driver in a compatibility mode and then avoid the Wi-Fi connectivity error. Therefore, perform the below steps and enjoy a hassle-free connection. 

  1. Right-click on the network driver Setup file and select Properties from the context menu.
  2. Then, choose the Compatibility tab from the Network Properties window.
  3. Enable the checkbox says, “Run this program in compatibility mode for” and then choose the OS version. Be careful at the time of selecting the Operating system and it should be similar to your host computer.
  4. Next, proceed with the installation process by maintaining the on-screen instructions and wait until the message shows “Update process is done in compatibility mode”.
  5. Finally, connect the wireless device to a computer and see whether the Wi-Fi dropping issue still persists or not. 

Solution 3: Change into a Valid Signal

An invalid input frequency of a signal is a barrier of a flawless Wi-Fi connection. So, verify the signal validity first and then insert a valid input by following the steps mentioned below. 

  1. Open the Control Panel window and locate the Network Connections.
  2. Now, right-click on your Wi-Fi Network Adapter and open Network Properties window.
  3. Then, tap on the Networking tab from that window and hit the Configure button.
  4. Go for the Advanced tab from the Network Configuration window and then tap on the option says, “Scan Valid Interval”.
  5. Make the value “120” from the drop-down list and confirm by tapping on the OK button.
  6. Finally, close the main window and connect your Acer laptop to that wireless network to WiFi turning off Windows 10 issue effectively. 

Solution 4: Run the Network Troubleshooter

You can choose the in-built network troubleshooting service and diagnose the common network issues effectively. So, follow the steps mentioned below and get rid of this connection issue.

  1. Open the Control Panel window and click on the Troubleshooting option.
  2. Next, tap on View All and choose Network Adapter from the list appears on the screen.
  3. Finally, follow the screen wizard instructions and verify whether the Acer laptop still losing WiFi connection or it gets resolved. 

Solution 5: Turn Off the Power Saving Mode

If the power-saving mode is enabled, then you can face the Wi-Fi connection issue. Then, you have to disable Network Adapter Power saving mode immediately and see the results. 

  1. After opening the Networking Configuration window, click on the Power Management tab.
  2. Remove the tick from the option says, “Allow the computer to turn off this device to save power”.
  3. Finally, press the OK button and apply the new changes. Now, connect the Acer laptop to a wireless network and test whether the “Acer laptop WiFi won’t reconnect” issue got fixed or not. 

We have discussed the major reasons behind the Acer laptop wifi keeps disconnecting issue with effortless solutions. 

We hope this article will help you a lot when the Wi-Fi connection error occurs. 

In many cases, you need to fix the Wi-Fi settings error and upgrade the Acer laptop OS to overcome the problem permanently. However, you can’t avoid it easily without proper technical guidance.