Pro Tips To Fix Acer Laptop Headphone Jack Not Working Issue

Have you ever connected your headphone on your laptop and then got the error message “Acer laptop headphone jack not working”? Then don’t worry. 

Several users have reported this issue especially after upgrading the PC to the newer version. 

This is one of the most commonly occurring issues that basically occurs due to the misconfiguration of the system settings or audio settings.

Sometimes, the outdated audio driver or the system fault in the IDT audio service is another prime cause for this issue.

But there is no need to worry about. In this article, we have discussed all the effective solutions to get back the audio on your headphones as earlier.

So, go through this article until the end to overcome this issue.

Eliminate Acer Laptop Headphone Jack Not Working Issue with these Hacks:

The wait is over now. You can now go through any of the steps that we have shared below to fix the Acer headphone jack not working issue in minutes.

Method 1: Plug the Headphone and Restart the Computer

The easiest way to fix the headphone issue is by simply restarting the computer while the headphones are plugged in.

To do so, follow the steps we have shared in the following section.

1. At first, if the computer is turned on, simply insert the Headphone into the jack.
2. Now, click the Windows button and select the Restart button from the options.
3. When the computer starts, play an audio file and see if the audio is now hearable.

If the above steps fail or the issue remains, try the next solution stated below.

Method 2: Set the Headphone as Default Device

When the users insert the headphone into the audio jack, the computer cannot set it as default automatically which results in the jack not working issue.

Hence, you need to set the headphone as a default device to play the sounds through your headphones.

1. Turn on the computer and open the Device Manager from the Windows Search panel or by pressing the Windows + X key.
2. Now, when the Device Manager opens, select the Control Panel option from the list and open it.
3. After that, change the View category from the top and select the Hardware and Sound option from the left side.
4. Now, click the Sound option from the list and locate the Headphones option.
5. Click on the option and select the Set as Default option from the bottom of the screen.
6. Finally, click the OK button and click the Apply button next to it to confirm the task.

After setting the headphone as default, restart the computer and see if the sounds are now playing through the headphones.

If still the issue persists and the audio still not playing, you can try one more solution we have shared below.

Method 3: Update your Audio Driver from Device Manager

Sometimes, the audio driver goes outdated or corrupted which crash the audio system and result in this issue.

To resolve this issue, you need to update the Audio driver. Here are some tips to perform this task.

1. Turn on the computer and open the Device Manager from the Windows Search panel or by pressing the Windows + X key.
2. Now, when the Device Manager opens, change the View category and select the Application option.
3. When the Application list opens on the next screen, locate the Realtek Audio driver option.
4. Right-click the option and select the Update option from the list to continue.
5. After that, select the “Browse my computer for driver software” option from the menu and this will redirect to the manufacturer’s website.
6. Now, click on the Download button below the screen and wait until the download is over.
7. When the download is over, select the Install Now button below the screen and follow the on-screen instructions to complete the task.

After installing the audio driver successfully on your Windows, restart the PC and see if the audio is now playing on your headphones.

If the headphone is still not making any sound or the issue remains, try out the next solution.

Method 4: Change the Settings in Realtek HD Audio Manager

There might be another possibility that there is some misconfiguration in the Realtek audio manager which is causing this issue.

You need to reconfigure the settings in the Realtek HD audio manager to get the sound back on your headphones.

Just follow the steps that we have discussed below to change the settings.

1. Turn on the computer and click the Taskbar from the bottom next to the soundbar.
2. Select the Realtek Audio option from the pop-up menu and click on the small folder icon.
3. After that, go to the upper-right corner of the screen and tick the box next to Disable front panel jack detection option.
4. Now, click the OK button and then on the Apply button on the pop-up menu to confirm the task.

After proceeding with all the steps successfully, close all the tabs and restart the computer to see if the issue is fixed.

If the audio is still not playing and the issue remains, go through the next solution that we have discussed below.

Method 5: Uninstall the IDT Audio Device

The IDT Audio device is a type of program that allows the device to enable the high-definition audio files.

However, there might be several issues that get stuck with the programs after at a time which can cause several errors.

Hence, to get the audio back on your headphones, you need to uninstall the program manually.

To do so, go through the steps that we have given below.

1. Turn on the computer and open the Device Manager from the Windows Search panel or by pressing the Windows + X key.
2. Select the Control panel option from the list and wait until it opens.
3. After that, select the View as large icons and locate the Programs and Features option from the right side.
4. Click the option and select the IDT audio driver option and right-click on that.
5. Select the Uninstall option from the list and wait until the task is successful.

Now, when the uninstallation is completed, restart the computer and see if the audio is now playing accurately.

You can head over to another method if the issue still remains and not fixed yet.

Method 6: Disable the Front Jack Panel Detection Manually

If the issue remains even after persuing all the above methods, then you need to disable the front jack panel detection.

1. Turn on the computer and open the Run command from the Windows Search panel or by pressing the Windows + R key.
2. Now, when the Run command opens, type Control panel into the box and tap the Enter key to open the action.
3. After that, select the Hardware and Sound option from the list and locate the Realtek HD Audio Manager option.
4. Click the option and select the Connector option on the next screen.
5. After that, click the Disable option and check the box to allow the settings.

Now, close all the tabs and restart the PC to see if the audio is now playing perfectly as earlier.

Summing Up

Hope that the solutions we have discussed above have helped you to overcome Acer laptop headphone jack not working issue.

If somehow, the issue still persists or the sound is still not playing through the headphone, then either the headphone is damaged or there might be some other hardware issues.

In that case, you need to replace the audio jack or the headphone or you can get in touch with a hardware expert.